1622 V

 

Download this page As [PDF] 

DIN 8555             E 1 - UM - 400

 

Application / Properties: Thick basic-covered electrode for depositing highly wear resistant overlays. The weld metal can only be machined using sintered hard metal tipped tools. It is particularly resistant to impact and shock.

A tough buffer layer (with 1803J electrodes) is only required with crack sensitive steels. It is possible to deposit even a large number of layers without the need of intermediate buffer layers. 1622V can be easily welded in all positions expect vertical-sown. 

 

Weld metal analysis in % (typical values):

C	Mn	Si	Cr
0.20	0.40	0.50	2.8

 

Mechanical Properties of all-weld metal :

(single values are typical values)

Hardness as-welding
37-42 HRC

 

Amperage:
3.25 Ǿ	4.0 Ǿ	5.0 Ǿ
105-135	120-180	170-240

 

Materials:

Rebuilding of rails, rails crossing and switch pointer, wear parts such as dredger parts, polygon edges, bearing surface, striking tools, dies, tyres, wheel flanges, slide surface subjected to heavy wear, reconditioning of lower dies and punishes, etc.

 

 

 

 

Rebaking : required at 300°C to 350°C for 2hrs.